Chip Inserter with Pin Straightener
Function: This tool is designed
to insert a DIP chip into a circuit board.
Twizers
Function: Twizers is used for inserting and
removing jumper’s blocks. It is very useful to hold small parts which are
dropped in an accessible place.
Needle Nose Pliers
Function: Needle Nose Pliers is used to insert and remove
jumper blocks, straighten bent pins and connectors, and remove cables.
Soldering Iron
Function: To join the two
objects together so they can join together permanently with the solder.
Wire-cutters and Strippers
Function: The cutter piece is adjacent to
the hinge itself. It is used to cut off the length of wire needed, as well as
to remove a faulty piece of wire. Moving down the handle, different notches are
present to indicate where to use the wire stripper tool for different sizes of
wire. This enables plastic coating to be easily stripped off without inflicting
damage to the wire.
Adjustable Wench
Function: It is a spanner with a
“jaw” of adjustable width which allows it to be used with different sizes of
fastener head (nut, bolt etc.) rather than just one fastener, as with a
conventional fixed spanner.
Screwdrivers
Torx Screwdriver or Bits
Function: These are the
star-shaped screwdriver heads that are used to make equipment “tamper-proof”.
Slotted Screwdriver
Function: It is a good
screwdriver with magnetic, interchangeable bits and a comfortable handle. The
magnetic tip will prevent screws falling into the PC, and will let you get
access to drives mounted deep in your system case.
Nut Driver
Nut Driver 3/16″
Function:
It is the really important one because this is the size of nut most commonly
used on PCs. These hexagonal nuts are used as mounting hardware for motherboards
and serial and parallel ports.
Nut Driver 1/4″
Function: It allows one to use a single handle with a
number of sizes instead of having a separate nut driver for each size.
Chip Extractor
Function: These tools is used to
remove chips from regular (non-ZIF) sockets, but modern PCs do not generally
use these sockets any more. It is useful for upgrading much older systems in
some cases.
Three Prong Parts Retriever
Function: These tools is used to
remove chips from regular (non-ZIF) sockets, but modern PCs do not generally
use these sockets any more. It is useful for upgrading much older systems in
some cases.
Spare Part Tubes
Function: These handy
parts tubes is use to hold extra computer screws, nuts and washers.
Solder Reel
Function: To be molten so that current can flow through.
Reversible T10/T15 Torque
Function: To loosen or tighten similar shape screw.
